- Location
- Tampere, Finland
Can't send PM to you...
Do you have carb rebuilt kit for Buckshot 46mm carbs... I need... =)
Do you have carb rebuilt kit for Buckshot 46mm carbs... I need... =)
WORLD CHAMP PROVEN GASKETS made fresh daily for EVERY 2 stroke YAM-KAW-SEADOO.Also A/M parts gaskets
- Thread starter SUPERJET-113
- Start date
SUPERJET-113
GASKETS FOR CHAMP BRAP!
- Location
- Lake Havasu City, AZ USA
Sorry bout that!
Message box cleared, PM's sent!
Message box cleared, PM's sent!
SUPERJET-113
GASKETS FOR CHAMP BRAP!
- Location
- Lake Havasu City, AZ USA
All gaskets made fresh daily! Ah! that new gasket smell and feel! New gaskets do dry out over time and will not crush and seal as well the first time!
We dont stock bins full of gaskets and forget about it. We keep all our gasket materials bagged to keep in the freshness. There is a difference!
Ask if you need something, my list needs to be updated and there are a lot of other gaskets/seals/orings that i have.
See first post with list and prices!
Have a great day!
We dont stock bins full of gaskets and forget about it. We keep all our gasket materials bagged to keep in the freshness. There is a difference!
Ask if you need something, my list needs to be updated and there are a lot of other gaskets/seals/orings that i have.
See first post with list and prices!
Have a great day!
chriselmore_1
high on resin
- Location
- san jose ca
nice gaskets.nice prices. good communication. quick shipping. thanks again!
SUPERJET-113
GASKETS FOR CHAMP BRAP!
- Location
- Lake Havasu City, AZ USA
Thanks for the great feedback Chris, much appreciated!
All gaskets made fresh daily! Ah! that new gasket smell and feel! New gaskets do dry out over time and will not crush and seal as well the first time!
We dont stock bins full of gaskets and forget about it. We keep all our gasket materials bagged to keep in the freshness. There is a difference!
Ask if you need something, my list needs to be updated and there are a lot of other gaskets/seals/orings that i have.
See first post with list and prices!
Have a great day!
loictahiti
Site Supporter
- Location
- Tahiti, french polynesia
Hi superjet 113
What thickness are your 61x/62T head Gaskets?
thks
What thickness are your 61x/62T head Gaskets?
thks
SUPERJET-113
GASKETS FOR CHAMP BRAP!
- Location
- Lake Havasu City, AZ USA
They are stock thickness of .050"
Last edited:
SUPERJET-113
GASKETS FOR CHAMP BRAP!
- Location
- Lake Havasu City, AZ USA
All gaskets made fresh daily! Ah! that new gasket smell and feel! New gaskets do dry out over time and will not crush and seal as well the first time!
We dont stock bins full of gaskets and forget about it. We keep all our gasket materials bagged to keep in the freshness. There is a difference!
Ask if you need something, my list needs to be updated and there are a lot of other gaskets/seals/orings that i have.
See first post with list and prices!
Have a great day! :wavey:
We dont stock bins full of gaskets and forget about it. We keep all our gasket materials bagged to keep in the freshness. There is a difference!
Ask if you need something, my list needs to be updated and there are a lot of other gaskets/seals/orings that i have.
See first post with list and prices!
Have a great day! :wavey:
- Location
- Puerto Rico
Got mine today, excellent product, fast shipping. Recommended!
SUPERJET-113
GASKETS FOR CHAMP BRAP!
- Location
- Lake Havasu City, AZ USA
Thanks for the kind words man, much appreciated!
All gaskets made fresh daily! Ah! that new gasket smell and feel! New gaskets do dry out over time and will not crush and seal as well the first time!
We dont stock bins full of gaskets and forget about it. We keep all our gasket materials bagged to keep in the freshness. There is a difference!
Ask if you need something, my list needs to be updated and there are a lot of other gaskets/seals/orings that i have.
See first post with list and prices!
Have a great day!
i am in need of a few gaskets...
i am rebuilding a 701x in a blaster, installing a riva red pipe and i need the exhaust manifold gasket and the triangular gasket connecting the two pieces of the red pipe together...also what is your suggestion for the silicone sealant to be used, any preferences?
i am rebuilding a 701x in a blaster, installing a riva red pipe and i need the exhaust manifold gasket and the triangular gasket connecting the two pieces of the red pipe together...also what is your suggestion for the silicone sealant to be used, any preferences?
chriselmore_1
high on resin
- Location
- san jose ca
1211, yamabond4 or hondabond4 are what most use to seal cases
SUPERJET-113
GASKETS FOR CHAMP BRAP!
- Location
- Lake Havasu City, AZ USA
I do have exhaust manifold gasket that you need, but dont carry the Riva red pipe head pipe gasket(triangluar one). you'll have to get that from Riva.
SUPERJET-113
GASKETS FOR CHAMP BRAP!
- Location
- Lake Havasu City, AZ USA
All gaskets made fresh daily! Ah! that new gasket smell and feel! New gaskets do dry out over time and will not crush and seal as well the first time!
We dont stock bins full of gaskets and forget about it. We keep all our gasket materials bagged to keep in the freshness. There is a difference!
Ask if you need something, my list needs to be updated and there are a lot of other gaskets/seals/orings that i have.
See first post with list and prices! If there is something you need that you dont see, just ask.
Have a great day! :wavey:
We dont stock bins full of gaskets and forget about it. We keep all our gasket materials bagged to keep in the freshness. There is a difference!
Ask if you need something, my list needs to be updated and there are a lot of other gaskets/seals/orings that i have.
See first post with list and prices! If there is something you need that you dont see, just ask.
Have a great day! :wavey:
CJ407
YamaBlaster
- Location
- orlando, fl
i need a 701x b pipe exhaust gasket do you have any?
SUPERJET-113
GASKETS FOR CHAMP BRAP!
- Location
- Lake Havasu City, AZ USA
Yes, how many would you like? :biggrin:
Sending you a PM.
All gaskets made fresh daily! Ah! that new gasket smell and feel! New gaskets do dry out over time and will not crush and seal as well the first time!
We dont stock bins full of gaskets and forget about it. We keep all our gasket materials bagged to keep in the freshness. There is a difference!
Ask if you need something, my list needs to be updated and there are a lot of other gaskets/seals/orings that i have.
See first post with list and prices! If there is something you need that you dont see, just ask.
Have a great day!
SUPERJET-113
GASKETS FOR CHAMP BRAP!
- Location
- Lake Havasu City, AZ USA
All gaskets made fresh daily! Ah! that new gasket smell and feel! New gaskets do dry out over time and will not crush and seal as well the first time!
We dont stock bins full of gaskets and forget about it. We keep all our gasket materials bagged to keep in the freshness. There is a difference!
Ask if you need something, my list needs to be updated and there are a lot of other gaskets/seals/orings that i have.
See first post with list and prices! If there is something you need that you dont see, just ask.
Have a great day!
We dont stock bins full of gaskets and forget about it. We keep all our gasket materials bagged to keep in the freshness. There is a difference!
Ask if you need something, my list needs to be updated and there are a lot of other gaskets/seals/orings that i have.
See first post with list and prices! If there is something you need that you dont see, just ask.
Have a great day!
- Location
- Idaho
Need to clear you inbox again!!
SUPERJET-113
GASKETS FOR CHAMP BRAP!
- Location
- Lake Havasu City, AZ USA
Ya, got a email saying it was full.
All clear now , and sent you a PM.
-------------------------------------------------------------------------------------------
All gaskets made fresh daily! Ah! that new gasket smell and feel! New gaskets do dry out over time and will not crush and seal as well the first time!
We dont stock bins full of gaskets and forget about it. We keep all our gasket materials bagged to keep in the freshness. There is a difference!
Ask if you need something, my list needs to be updated and there are a lot of other gaskets/seals/orings that i have.
See first post with list and prices! If there is something you need that you dont see, just ask.
Have a great day!
All clear now , and sent you a PM.
-------------------------------------------------------------------------------------------
All gaskets made fresh daily! Ah! that new gasket smell and feel! New gaskets do dry out over time and will not crush and seal as well the first time!
We dont stock bins full of gaskets and forget about it. We keep all our gasket materials bagged to keep in the freshness. There is a difference!
Ask if you need something, my list needs to be updated and there are a lot of other gaskets/seals/orings that i have.
See first post with list and prices! If there is something you need that you dont see, just ask.
Have a great day!
Last edited:
- Location
- Idaho
gracias