Super Jet Wiring in electic bilge?

[NorCalSJ]

ok got bilge mounted next to midshaft, theres a neg/pos wire from bilge, instructions say I need fuses? wtf why dont they come with fuses already??? I bought the blowsion switch that bolts on the start/stop assembly on the handlebars...its one thick black wire with a white and black wire inside so how do I go about wiring everything together? and if I need fuses which ones do I get?

 

[AtomicPunk]

Get a small waterproof "ATM" fuseholder like this... MUST HAVE!

Wire the + lead of bilge through the fuseholder to the battery.
Wire the ground from the bilge to one lead from the switch (does not matter which), the other side of the switch connects to the - terminal on your battery.

 

[jettmatt954]

get a small waterproof "atm" fuseholder like this... Must have!

wire the + lead of bilge through the fuseholder to the battery.
Wire the ground from the bilge to one lead from the switch (does not matter which), the other side of the switch connects to the - terminal on your battery.

yup what he said

 

[NorCalSJ]

Get a small waterproof "ATM" fuseholder like this... MUST HAVE!

Wire the + lead of bilge through the fuseholder to the battery.
Wire the ground from the bilge to one lead from the switch (does not matter which), the other side of the switch connects to the - terminal on your battery.

Sweet sounds easy, trying to get on the water today =)

 

[jetpilot36]

Get a small waterproof "ATM" fuseholder like this... MUST HAVE!

Wire the + lead of bilge through the fuseholder to the battery.
Wire the ground from the bilge to one lead from the switch (does not matter which), the other side of the switch connects to the - terminal on your battery.

thats waterproof?

 

[AtomicPunk]

water resistant...

 

[Mark44]

Just fill it with dielectric compound.

Mark44

 

[burton391]

Just fill it with dielectric compound.

Mark44

what he said.

 

[ridethelip]

How do I wire everything together?
Ground bilge on engine case (black wire).Brown wire from bilge to white switch wire. Black switch wire is attached to inline fuse and attached to battery positive. OR
You can run brown wire from bilge to inline fuse to battery positive then run ground (black)from bilge to switch black in and white out to ground. You can run switch on hot side OR ground side.

 

[NorCalSJ]

is a 10 amp fuse good? thats what i bought...

 

[AtomicPunk]

10 is fine, no bigger.

 

[showmepro1200]

what he said.

And ziptie it shut after fillin it with the dielectric grease