650/X-2 will a 750 pump fit my 650?

[650FLOWRIDA]

i have a 650 kawi with a 750 big pin motor bored to an 800 fully built motor, but ive been hunting everywhere for a trim pump set up for a 650 but cant find one..i found a 750 trim pump and was wondering if it would work? aslo will 750 foot holds fit 650? thanks for any info :wave:

 

[Vumad]

One of the stickies in the X2 forum is "X2 mods". There are lots of useful links in there. There info you need is under the driveline header.

This is the link to the thread from the X2 mods thread you need.
http://www.x-h2o.com/threads/25517-how-to-750-pump-into-an-x2

 

[650FLOWRIDA]

thanks man! i wish i could just find a 650 trim system

 

[Vumad]

There's plenty of X2 trim systems out there. If you can convert the X2 to a 750 pump, you should. It costs $75 minimum to have a 750 prop cut to fit a 650 pump. If you retro to a 750 pump, then you can buy any 750/800 prop you want and simply bolt it in.

 

[Byeai]

here is my 650sx with turf and toby holds installed

 

[smrbum]

the 750 trims work on the 650 pump

 

[Byeai]

i got him one hes pickin it up tom