Super Jet Why are these here?

[nofear195]

Whys are these here? What are they? I'm guessing the one thats broken through needs to be patched back up

 

[AtomicPunk]

I am pretty sure that is where they fill the backend with foam. They put that wonderful little sticker over the hole. Hit it with some 5200, but you can be sure to have some waterlogged foam.

 

[nofear195]

ski has been sitting inside for a year. i will check the foam out. anyway to tell how water logged it is without cutting into the tray?

 

[vitalikol]

Dew meter

 

[chad]

I think your asking about the part with the screw in it... its there to hold the two halves together during assembly... I usually grind mine completely off...


Edit..... I. Zoomed and saw your were talking about the foam fill... 5200 or glass over it

 

[nofear195]

Thanks for the info. It felt dry this morning when I checked. Ive got some 5200 around here somewhere, going to fill them up

 

[Mark44]

NOS attachment area under that sticker.

 

[nofear195]

NOS attachment area under that sticker.

good to know can i run a 15 or 20lb bottle?

 

[munki63]

Glass over

 

[hydrostyler]

Had a buddy that I believed had wet foam. Ski felt all lop-sided when turning. We drilled a few small holes at the very end of the ski bottom and lifted the nose up over night. Sure enough the floor was wet the next morning. If it would have been dry, just 5200 the holes and go ride. We defoamed/refoamed through the footholds.

 

[WaveDemon]

NOS attachment area under that sticker.

New Old Stock?

 

[JBattag121]

Hi guys, I'm doing some mod/repair work to my SN. I've already hollowed out the foam and have started repairs for the leaky hull. What is 5200? is it the white sealer I see areound the tubes? if so, where do I find it.

Thanks,
JB

 

[WaveDemon]

its a white sealer made by 3m

you can buy it at any marine store and some walmarts.