Which handpole and spring are these?

[PitStop504]

Just picked up this 95 SuperJet. I figured out that it has an AC Racing pole, but I don't know the stock measurements to tell if its a stock length or -2. Also, I don't think it has the right spring. It wasn't holding the pole up at all. I took a pic of how it was installed and also a pic of the spring by itself. I can't figure a way to install this spring to get good tension to keep the pole up so I suspect its not the right one. Any help would be appreciated!

 

[brett]

looks stock length...

 

[vitalikol]

I am not expert but I think spring installed backward

 

[fast superjet chase]

its only half of the stock spring

 

[jetfreak78]

looks like a polished AC SN Pole to me. there have to be 2 springs, one on each side with a connector in the pole. the spring in the picture looks like the stock one to me. i had 2 pairs of springs, on one the spring-wire-diameter mesured 5,00mm (stock?) and on the other 5,5mm (am?), but even with the 5,5mm spring the setup never holds the pole up!

here are some pics for you to check how to install the prings correct

 

[PitStop504]

Okay it makes more sense now. I only have half of the already weak stock setup. The pole feels like it weighs a ton compared with my 550. Would the single Blowsion spring work well with the AC Racing pole?

 

[BBYamaha]

Yes, my blowsion one held the pole all the way up when the ski was floating in the water. Would have to push on the back to get it to come down a little so I could reach it with my AC pole.