whats the O.D of a fly wheel?

[surfgy45]

need the outside diameter of a flywheel. RAD 62T if it matters. need to pull one out but i need to buy a puller first. thought id get it before i cracked anything open.

i was looking at harbor freight pullers with a set of 4", 6" 8" O.D pullers. good choice?

 

[njfl]

You will need a bolt-grip puller, not the jaw type. There is basically only one standard bolt-grip puller kit available, anywhere. If you buy from Harbor Freight, that will work, but I recommend going to Home Depot and getting Grade 8 5/16" washers (you will be using the 8mm bolts to remove the flywheel). I had to do this because the standard washers curled up under the force. As soon as I got the Grade 8 washers, the flywheel pulled right off.

 

[surfgy45]

awesome. i was looking at that too. thanks!