what VP racing fuel to use?

[Troublemaker]

i pay $7/gal for CAM2 local here at a pump 116 LEADED , i was going to run VP but its way to expensive

 

[keefer]

I'm running 210psi with straight Renegade 110 leaded @ $6 a gal from a nearby pump. Two years and no problems running 3 degrees static advanced timing with an enhancer.

 

[BruceSki]

I'm running 210psi with straight Renegade 110 leaded @ $6 a gal from a nearby pump. Two years and no problems running 3 degrees static advanced timing with an enhancer.

sounds like a lot of bottom end snap

 

[keefer]

It does have a good grunt with the right prop. I try to avoid extended WOT. Next project will be a 5 mil with TL so I can take out the timing at upper RPMs.

 

[GIL]

It does have a good grunt with the right prop. I try to avoid extended WOT. Next project will be a 5 mil with TL so I can take out the timing at upper RPMs.

That is the understatement of the year-that thing really rips hard!!! I for one was very impressed.

 

[joshuaeric]

12.00 a gal I would shop that
9.25 if i buy it by the gal
2 strokes love leaded fuel
Really many many reasons

If I could afford C12 and it was at a pump within 5 miles of me, I would run it all day long and twice on sunday.

 

[SUPERTUNE]

C-12 is very good for mixing unleaded fuels with it.
Leaded fuel is very good for 2 strokes as far as running well and making power, but not legal for competition now.
Always remember... you CANNOT compare other brands of fuel octane to VP fuels unless you look for the MOTOR (MON) octane rating of other brands as the listed octane on VP uses motor octane rating while most others use RON rating!
When competing we use VP MS109 (unleaded)

 

[Millertime]

The extra HP from the oxygenation of MS109 is nice to. If you really want to be safe though C-12 is it.