Freestyle what pitch?

[102nd7]

Going to need to buy a prop probably. Figured I'd ask what pitch to look for. Specs are
55 lbs hull
701
180 psi
Atp total loss
Pfp
Oem 144 pump

 

[stagesrt4]

i was running a hooker 9/15 with that setup

when i went to BB 781 i installed a 10/16

 

[XJCrawler]

Plans for a solas?

Skat c75 12-17 5mm cutback, 85.5mm bore for real snappy bottom end

 

[XJCrawler]

i was running a hooker 9/15 with that setup

when i went to BB 781 i installed a 10/16

I've never really like the 10/16 hooker with a big bore, it loads the pump up too much. Always had to space it out 1-2mm

 

[102nd7]

Looking to do prop only. Not spending any unnecessary money.

 

[stagesrt4]

I've never really like the 10/16 hooker with a big bore, it loads the pump up too much. Always had to space it out 1-2mm

well i ran the 9/15 for little while on the BB 781 n felt great but was able to arrange a STR8 up trade for a 10/16.

from what ive read n seen(not tested) most run 11//16 roughly on BB setups

 

[Bobert540]

12/17 big hub swirl worked well in my 144 stock pump and 61x/62t setup. As mentioned above, hooker props seem to load up a lot on bottom.

 

[mike b]

I have a jm781 with msd enchancer and pfp stock pump on a BOB hull (roughly 90 lbs) and was recommended a small hub 9/15 swirl or hooker. I'm coming off a waveraider stock prop so I'm expecting big changes ha. Your system doesn't sound too far away (I would think) so a small pitch like 9/15 or 10/16 shouldn't be bad

 

[NVJAY775]

What's your elevation?