What parts off a waveblaster 1 fit a superjet?

[Dustin88]

Will a ride plate, intake grate, pipe from a waveblaster 1 fit on a sn superjet?

 

[JustinB]

The stock pipe will transfer, but a Riva Red (in your signature) wont- the outlet is at the wrong angle and will be pointing into the gas tank; but it can be cut off an welded the correct direction. Superjet pipes point to the front, and B1 pipes are about 45 degrees. If you find an aftermarket pipe that has the outlet pointing down like the stock pipe (some Westcoast and Protec), it will fit both.

 

[allboutthefreeride]

Will an ebox for a waveblaster fit a superjet without having to lenthen any wires?

 

[JustinB]

Will an ebox for a waveblaster fit a superjet without having to lenthen any wires?

Yes, it will fit fine. The only difference in the wiring is the length of the start/stop switch wires, which disconnect right outside the box.

 

[Dustin88]

Does anyone know if the intake grate or rideplate will work?
Also do they have the same pumps/impellors?

 

[JustinB]

Does anyone know if the intake grate or rideplate will work?
Also do they have the same pumps/impellors?

same pump, different impeller. Same intake grate, different ride plate.

 

[Dustin88]

Thanks, would you happen to know what the difference in the impellers is and has anyone ever used a wb1 stock impeller on a superjet?

 

[JustinB]

Thanks, would you happen to know what the difference in the impellers is and has anyone ever used a wb1 stock impeller on a superjet?

The B1 impeller (I think its a 15/18) is an upgrade over a stock SJ impeller, and its stainless instead of aluminum.

 

[Dustin88]

Thanks man your full of info! One more question and Ill leave you alone.
Do you know what impeller came on a stock 95 superjet(pitch)?
Does a waveblaster have a swirl impeller, because mine does and Im trying to figure out if its factory.

Also would a factory waveblaster impeller be too much to put in a factory superjet? would it affect bottom end or top end?
Thanks
Dustin