Blaster what options for nozzle, pump and impeller

[taylor2000]

So seems like theres alot of options on mods for the standups but i dont come across much for the blasters when it comes to pump housing reductions etc etc. Wanting to get more power for next year and im am assuming i have som old factory nozzle hub propeller stuff. Like to get the blasters more braaaap if possible. Got two blaster1's. bolt on mods, pipes, heads etc. one has the 760 dual carbs and yes both are blaster1's someone put the 760 in it. so like to get a different pump nozzle propeller for it. It has alot of power on the long shot but i think it could use more upfront power. the 760 has a heavy mid shaft but nozzle looks the same comparing the two blasters.

 

[tshank123]

Everything a superjet pump uses crosses over to blasters. I personally dont think there is much to gain with after market nozzles and pump cones. You can have the nozzle bored, which will give it more bottom, but will also have a negative affect on your top speed. If you're looking for more bottom you can try a hooker 9/15 or so, but again, if it gives better bottom it will slow you down up top.

And if you've got some extra coin, you can install a solas 12 vein pump section. You will definitely notice the difference with that. Way better hookup, especially in th rough.

 

[taylor2000]

wish i was rich I wouldnt be so hesitant on what to do or such a squirrel looking for the best acorns for winter. Thanks for the info. I have noticed running on the lake im continually letting off the throttle over rough waters for it looses its hook ups. Heres the grate im using now.

 

[Quinc]

wish i was rich I wouldnt be so hesitant on what to do or such a squirrel looking for the best acorns for winter. Thanks for the info. I have noticed running on the lake im continually letting off the throttle over rough waters for it looses its hook ups. Heres the grate im using now.View attachment 227704

Get a deep scoop like the worx 201 or Protec moflow etc. It will stay hooked up. I have to put in a fair amount of effort to break it loose.

 

[taylor2000]

got this one on
the 701 with the jetdynamics ride plate. Maybe switch them around on the skis. I have the protech ride plate and grate combo on the 760. Maybe swap them around. 701 is just the kids ski. so if i went with solos or what ever on the prop can i just use oem pump and housing to save money and upgrade on that later?

 

[Yamabooeey]

Any top loader grates are better than the open grate for hooking up. And you can use solas or skat props on the stock pumps.