Wcf !

[PancakePete]

I thought water was in hull !
SO I took footholds out, cut tray in front by bulkhead.
No WATER... Steve did such a good job... I am impressed.

What happend was, whatever sealer the rear side exhaust with, it held a tiny little water and then it leaks out the side when you flip it upside down, all the foam on the inside is dry ! I am impressed, now since I butchered his beautiful work, I need to reseal now. I hate when I question Crap !
I should of left well enough alone...
Did have to fix battery box, that my fault though, pancakin.

Any way, great work, this thing is sure a worthy ski... :hail::hail::hail:
that is 2 summers of beating ! well, one and a half !

Steve, you deserve the credit ! :hail:

www.watercraftfactory.com

PS.. No freakin cracks either.....

 

[Sanford]

I sometimes drill tiny 1/8" holes in key areas then insert a long wooden shish kabob stick. If it comes out dry, I use Marine-Tex to fill tiny holes.

 

[PancakePete]

I sometimes drill tiny 1/8" holes in key areas then insert a long wooden shish kabob stick. If it comes out dry, I use Marine-Tex to fill tiny holes.

Forget who your talking to... :boggled:
That would be the intelegentallly thing to do..

Thanks, good call... I should of... I just figured,
I am rehauling ski, why not do it now. oops !

 

[SXIPro]

I sometimes drill tiny 1/8" holes in key areas then insert a long wooden shish kabob stick. If it comes out dry, I use Marine-Tex to fill tiny holes.

Are you a baker by trade?

 

[Sanford]

Are you a baker by trade?

No but I did stay at a Holiday Inn and save money by switching to Geico.

 

[Fathom]

I sometimes drill tiny 1/8" holes in key areas then insert a long wooden shish kabob stick. If it comes out dry, I use Marine-Tex to fill tiny holes.

Done did dat on the wife's SN, found water, refoamed and sealed the little 1/8" holes with 5200. Worked great. I was a baker as my first job while in High School.