Waveblaster sputter/miss at full throttle

Feerechris

Feerechris

Location
Burlington
Hey guys. I recently just bought a 93 waveblaster off a dude from Bancroft. I bought the ski and didn't notice really anything wrong with it during the test ride( limited space and couldn't open it up). So I took it out for a ride at Burlington beach. It runs fine at half throttle and 3/4 throttle but when I open it up there's a little sputter or slight miss. It has a oil block off kit and Riva ride plate. I'm running 50:1 fuel ratio. Other than that completely stock. Any ideas what it may be? Trying to get it fixed for the long weekend! Any help would be much appreciated!


Thanks Chris
 
tshank123

tshank123

Yo hablo ingles
Location
Vegas
Your high speed screws affect everything above 3/4 throttle. You can try adjusting them, but just be careful not to turn the screws in too much or you could possibly seize your motor from being to lean. You should really read up on how to tune your carbs. There are a lot of threads on it.
 
You must log in or register to reply here.
Top Bottom