Vxr pro piston rings?

K

Kbauer8

Location
New york
What are some good vxr piston rings. The engine is at 85 compression. I plan on changing all the gaskets, piston rings and crank seals. I see a lot of different rings but not sure which one I should go with.


Sent from my iPhone using Tapatalk
 
john zigler

john zigler

Vendor Account
Location
wisconsin
Kbauer8 said:
What are some good vxr piston rings. The engine is at 85 compression. I plan on changing all the gaskets, piston rings and crank seals. I see a lot of different rings but not sure which one I should go with.


Sent from my iPhone using Tapatalk
Click to expand...

It is rare that you can just install rings. Cyls get out of round, tapered, and piston to cyl wall clearance can be excessive."IF" by chance your clys, and pistons are still in spec, and NOT scored, you can deglaze your cyls with a hone, and install new rings. Rings need to match your pistons. Both size, and brand. IE-if you have OE Yamaha pistons, you need OE Yamaha rings.

Usually it is best to bore up, so your cyls are straight and true, and install new pistons, and rings at the proper tolerance.
 
You must log in or register to reply here.
Top Bottom