Using a backflush kit on a 701 with stock head?

[GSully23]

Hey guys, recently installed my new b-pipe and when doing so I got rid of my flush kit that was previously hooked up. I have a stock head, but ordered the 3 way pisser backflush kit off blowsion because I figured that would be easier. My question is, currently I only have 1 pisser since I'm running the stock head, and that's connected to a T that goes to my fcv/waterbox, and top of head pipe.

So my question is, is it ok to run this backflush kit since its feeding the head pipe and stinger, and not going directly to the head? I know it's called a backflush for a reason but I just want to make sure. I've included a pic of my water routing to help clarify.

 

[jetskidude1113]

It'll work, you have a FCV at the stinger inlet to force more water through the headpipe, or else most of the water will just go into the stinger and out the waterbox. The water will travel from the headpipe to the head, cylinders, exhaust manifold, and out the pump. It will also flow through the open adjusters on your headpipe and out with the exhuast. I have a b-pipe with a 2 water outlet R&D head. the front outlet goes straight out the pisser and rear outlet feeds the headpipe, stinger, and out another pisser. I backflush through the pisser of the front head water outlet.