Ukraine 992cc

A

Antony Ukraine

Какой ставить импеллер?
Чувствуеться, что мотоцикл слабо едет, у него рывок есть а длины совсем нету. Он по ощущениям едет как 865сс с сухой трубой.
 
vitalikol

vitalikol

Jetski-Snowboard
Location
Pennington,NJ
Antony Ukraine said:
Какой ставить импеллер?
Чувствуеться, что мотоцикл слабо едет, у него рывок есть а длины совсем нету. Он по ощущениям едет как 865сс с сухой трубой.
Click to expand...

Chuck, what pitch impeller woud you recomend ? Ski got power but but didin't pull way it's shoud. Filled like 865cc with dry pipe
 
SUPERTUNE

SUPERTUNE

Race Gas Rules
Location
Clearwater Fl.
Victor, Tell him that a 144mm pump is to small for a 1000cc engine and a 148mm setback Skat-Trak is what he needs. He also needs to use a Worx '08-'09 Superjet intake grate with it. Part #228
I'll have to look in my spec book at the shop and see what pitches we run...can you PM me and translate my answer to him?
Thanks, Chuck
 
vitalikol

vitalikol

Jetski-Snowboard
Location
Pennington,NJ
SUPERTUNE said:
Victor, Tell him that a 144mm pump is to small for a 1000cc engine and a 148mm setback Skat-Trak is what he needs. He also needs to use a Worx '08-'09 Superjet intake grate with it. Part #228
I'll have to look in my spec book at the shop and see what pitches we run...can you PM me and translate my answer to him?
Thanks, Chuck
Click to expand...

I'll do it here
 
vitalikol

vitalikol

Jetski-Snowboard
Location
Pennington,NJ
SUPERTUNE said:
Victor, Tell him that a 144mm pump is to small for a 1000cc engine and a 148mm setback Skat-Trak is what he needs. He also needs to use a Worx '08-'09 Superjet intake grate with it. Part #228
I'll have to look in my spec book at the shop and see what pitches we run...can you PM me and translate my answer to him?
Thanks, Chuck
Click to expand...


Антоний. Чак говорит что 144мм водомет недостаточный размер для 1000сс ,тебе надо 148мм водомет. И Worx '08-'09 Superjet водозаборник. Part #228. Чак проверит его записи, какой пропеллер тебе нужен
 
vitalikol

vitalikol

Jetski-Snowboard
Location
Pennington,NJ
Antony Ukraine said:
Открой секрет, кто такой Чак
Click to expand...

Chuck 'SUPERTUNE' Quenzler III
2008 World Finals Champion Engine Builder
http://www.xmetalworks.com/
X Scream Inc. 1988 Carroll St. Clearwater, Fl. 33765 (727)442-7700

Чак работает в Х Scream. Он один из лучших мотористов в штатах, я отправил Чаку вопрос , можешь ли ты отделаться только пропеллером
 
Last edited:
SuperJETT

SuperJETT

So long and thanks for all the fish
Location
none
vitalikol said:
11/18 Skat-Trak Magnum impeller and a 148mm / 12 vein w/setback pump, use with a 84.5mm to 85mm exit nozzle is what this engine needs to hook up correctly!
Click to expand...

Wow, that's got to push a ton more water than what my 760 does with a 144 stock pump and 9/15 Hooker and 85mm nozzle.
 
You must log in or register to reply here.
Top Bottom