Tubby 2s & Blowsion 940 Marine Sealant

[SkiDaddy]

Anybody used this stuff to mount their Tubbies? I've read many of the threads, including Nick's install, but never saw mention of this sealnt - everyone seemed to be using 5200?

Is this something new?

 

[Matt_E]

I used it. Much cheaper than an equivalent amount of 5200. Not to mention, this stuff cures within 24 hours.
I have had it on there for half a season now. This includes somewhat warm water riding, cold water riding (40's), and surf use and abuse.
It has held up absolutely great.

 

[SkiDaddy]

Good input Matt.:woot: Anyone else?

 

[yamaslut]

I used epoxy and cloth to mount mine

 

[SkiDaddy]

Yeah, I saw your writeup on install, good stuff.:biggthumpup: I may want to try your ski in the surf once she's repaired, I remember riding it before & not noticing any funny handling issues, just carving. That was a 3 minute ride though.

BTW I found I had a broken plug cap, now she's firing on both cylinders all the time, I may not need a different prop. That and the LPW shaved flywheel...:Banane01: :Banane01:

 

[yamaslut]

Yeah, I saw your writeup on install, good stuff.:biggthumpup: I may want to try your ski in the surf once she's repaired, I remember riding it before & not noticing any funny handling issues, just carving. That was a 3 minute ride though.

BTW I found I had a broken plug cap, now she's firing on both cylinders all the time, I may not need a different prop. That and the LPW shaved flywheel...:Banane01: :Banane01:

there is nothing bad about tubbies at all!!!!!!!!!!!!!