Trim cable broke. Where to get new cable??

[torquen]

I have a ProTec trim nozzle that I modded and flipped. Its worked great for several years. Yesterday the cable finally snapped. I am looking to leave the shield in place and run a new cable inside, solder on the ball at the end and call it good. Where can I order up custom length cable? Could I just go down to the rigging store and buy the same diameter down rigger cable? The nozzle has a return spring that brings it back to center. So really I only need the cable to "pull" the nozzle up.
G

 

[Mark44]

Terry cable.

Mark44

 

[sicksxr07]

Hot products carrys the sato cable(jap) style . The cable is atlases twice the thickness of the skat or anyone else's . Same size housing . Come with barrel barrel ends or barrel stud end. 100$ this baby won't stretch

 

[torquen]

Ended up going to Orchard supply hardware. They had stainless steel cable "1/16" for .34 cents a foot. Installed cable in my ski yesterday afternoon and all is working great.
Garrett

 

[OCD Solutions]

I have the Sato Cable and it is definately solid. The ends do eventually fray and snap off but I have been able to trim it back a couple times and attach new ends. I have enough cable to perform at least 6 more repairs so I should be good for a couple more seasons yet. I make the ends out of a stainless bolt 2-3 at a time so I always have a couple spares.

 

[IS0LD0UT]

I have the Sato Cable and it is definately solid. The ends do eventually fray and snap off but I have been able to trim it back a couple times and attach new ends. I have enough cable to perform at least 6 more repairs so I should be good for a couple more seasons yet. I make the ends out of a stainless bolt 2-3 at a time so I always have a couple spares.

The barrel end snapped of my wamilton cable, can you provide more details on how to repair it with your bolt method?

 

[buxtonous]

i bought one 2 days ago from NC jetski for £45 but obviously their in the U.K if thats any help to you at all....