Total loss curves
- Thread starter Otäck
- Start date
I have one straight from DASA tho it seems a tad bit on the advanced side for pump gas.
Set static timing at 30 degrees btdc
Switch 3 s1=off s2=on s3=off s4= on to set static timing.Off to run.s5=on s6=on s7=off s8=on
Switch 2 s1 thru s4=off s5=off s6=on s7=off s8=off
Switch 1 s1=off s2=on s3=on s4=on s5=off s6 thru s8=on
retard begin speed=5000rpm
max speed rev limit=9000rpm
holeshot rev limit=3000rpm
max speed retard=2/17
max timing=max
timing can be reduced by changing s6 thru s8 configuration
Sent from my iPhone using Tapatalk
Set static timing at 30 degrees btdc
Switch 3 s1=off s2=on s3=off s4= on to set static timing.Off to run.s5=on s6=on s7=off s8=on
Switch 2 s1 thru s4=off s5=off s6=on s7=off s8=off
Switch 1 s1=off s2=on s3=on s4=on s5=off s6 thru s8=on
retard begin speed=5000rpm
max speed rev limit=9000rpm
holeshot rev limit=3000rpm
max speed retard=2/17
max timing=max
timing can be reduced by changing s6 thru s8 configuration
Sent from my iPhone using Tapatalk
- Location
- Charlotte NC
This curve is not that aggressive for pump gas. I wouldn't be even close to scared of it......
I just feel like 30 static is a bit much. I'm no TL pro tho. Kinda new to it.
Sent from my iPhone using Tapatalk
- Location
- Charlotte NC
I ran more on a pump gas dasa 1000 for 2 seasons....
speedysprocket
Alex
- Location
- Chesapeake, VA
I'm running a base timing of 32 degrees on pump gas and 160 psi cranking compression..
- Location
- central florida
the op shows 30cc domes, wonder what his compression is? That would certainly influence his timing advance/retard.
- Location
- Charlotte NC
30cc domes are pretty small for that much stroke.
- Location
- Uk
Are you running a Flame TL?
- Location
- Stouffville, Ontario
- Location
- Uk
I have just bought a new TS2 and it has exactly the same curve programed in.
This worked will on my 1100 the weekend.
- Location
- Stouffville, Ontario
You should call ATP and just confirm it'll the best possible curve. They'll email it to you free of charge...
- Location
- Charlotte NC
In my opinion, the curves atp sends are always pretty conservative. Which is understandable because they don't want to be held responsible for blown up motors.
- Location
- Stouffville, Ontario
I'm okay with that lol
- Location
- South Africa
On my DASA 1200, switching from ATP curve to DASA curve made a significant increase in power
- Location
- Uk
Do you have a pic of the curve ur running?
Ive got a dasa 1100 and RRP pipe.
Running 30deg advance, twin spark bellow 3750.
Be interesting to see how early ur on the timing.
What do you have ur start retard set at?
Cheers
- Location
- South Africa
Red is DASA curve, blue is the curve it came with from ATP
- Location
- Uk
Thanks, so they bring the timing on a lot quicker, but only go to 28 instead of 30 advance.
Do you have a pic of the settings page please?
- Location
- South Africa
Do you have the V5.01 software and Flash?
