Torque settings...

[mk1]

Dudes , need to know the correct torque settings for the 3 bolts on the B-pipe exhaust.... Just had another breakkdown , and another nice swim back in to the slipway with my ski.... It would appear that i had over tightened the bolts , and one snapped.... Thanks.

 

[Magnum Mike]

from http://www.factorypipe.com/media/instructions/yamaha/701SJ03.pdf

Insert the Factory Pipe headpipe into the coupler. Use Windex or soapy water to help installation. Install the headpipe gasket, three 10 x 1.25 x 40mm bolts and 10mm lock washers (items #14,13,16). Loctite and torque to 30 ft.-lb