TNT Chamber (SOLD)

[Rushford_Ripper]

TNT blaster chamber, going to go a different route in my build.

$700 shipped


Possible partial trade for a superjet mod chamber

 

[fastgtfairlane]

great chamber. i have the nynja version in my superjet and it is a heck of a ripper. do you know if its the superstock or limited tnt chamber?

 

[Rushford_Ripper]

Not sure

 

[yurkanip]

This is one of best chambers out there, and beats a B pipe in power hands down. Why don't you run it??

 

[Rushford_Ripper]

Aren't these more of a race pipe vs. freeride/surf?

 

[Quinc]

Aren't these more of a race pipe vs. freeride/surf?

I ran one in the surf in my blaster and one in my freestyle ski and it is much better then the bpipe. Only pipe better is the lay down.

 

[Jr.]

like others here have stated, the TnT B1 as its know, is the best chamber for a B wet pipe application!
I have tested them up to and including 1100cc motors in freeride applications and they run Awesome!
the laydown it the only thing better! I personally run one on my TPE 1021 freeride ski
if your in Daytona next week? Come find me, Ill show you and let you ride it!

 

[Rushford_Ripper]

Seems like I have some thinking to do

 

[Rushford_Ripper]

Here’s my main issue, bushing doesn’t line up.

 

[yurkanip]

Here’s my main issue, bushing doesn’t line up.

Adjust it at your coupler side before cranking down the hose clamp, itl go together. I run the same pipe and bracket. amazing hit!. If you don't keep it, good luck with sale.....it will def move.

 

[Rushford_Ripper]

I just think it’s wide for my new hull and I messed with it at the coupler, could not get it right as it created a gap in the coupler.

 

[Jr.]

Ok Sometimes different length lordmounts are necessary? I have also drilled a new hole on chamber mounting bracket. Depending on hull? It might be necessary to “dent” chamber for clearance. Be careful not to crush it,
remember, this chamber was designed for a B1 hull, and you application is a standup hull.
so some tweaking is to be expected. Its definately worth it once done!

 

[Rushford_Ripper]

I am thinking the dent is required and would rather not go that route to a such a beautiful piece of art this is.

Would rather sell and appreciate all the responses.

$700 shipped w/ mounting

 

[Jr.]

I understand that! Its really hard to take the first swing!

 

[Quinc]

Maybe you can get an offset sanwhich mount? Or drill the mount on the pipe a little longer.

 

[MTRHEAD]

I prefer the mount that has the slot the other direction. I do know Tim’s pipe vary Not one of 3-4 I have had fit same

 

[fastgtfairlane]

I had to bend the lord mount on the pipe and move/refill the bracket to get it to line up. Then minor denting to clear the hull on my superjet. Mine is a c4 that had some welding done that wasnt pretty but works and fits great after those adjustments

 

[Big Kahuna]

you can slot the holes on the bracket to move it "up". Also slot the hold on the pipe tab and bracket side...... As far as denting, lots of small taps, dont way lay on it, just little hits all over and around to shape it.

 

[Rushford_Ripper]

I appreciate the help, but would rather just sell at this point. Too nice for me to dent.

 

[Rushford_Ripper]

Sold