Three 61X 82mm head gaskets .090" - $10ea Top quality Klingersil material.

[SUPERJET-113]

I had these .090" 61X 82mm bore head gaskets made for a guy a couple years ago and he bailed on payment. I dont know if anybody can use them for something, but they are 100% Klingersil top of the line material. A stock 61X head gasket is .047". So using this will lower your compression on a stock cylinder. This would be used for a special application cylinder that someone may have cut down to far or someone may have a head that is shaved more than they like, so they can use this to get to the specs they want.
So know that this is .090" thick...lol
Only wanting $38 shipped for all via USPS Priority.

 

[Big Kahuna]

Might want to post how running these will be different. Raises compression, lowers etc etc. (Same for the SXR Base Gaskets)

 

[Llopness]

Would these work with a 65mm piston?

 

[SUPERJET-113]

Would these work with a 65mm piston?

No Sir, they would not. This would be for 81mm-82mm Yamaha piston.

 

[Big Kahuna]

Would these work with a 65mm piston?

What uses a 65mm piston?

 

[Llopness]

What uses a 65mm piston?

Typo meant 85. Though according to the Taiwanese pistons I got on ebay a 66e does.

 

[SUPERJET-113]

Hola!