Jawbreaker
Rick James Edition
- Location
- Music City, TN
Hey Brian, I might buy it if you don't like it with that set up. :biggrin:
TBM w/ Mag Prop set up in SJ.
- Thread starter sjetrider
- Start date
waxhead
wannabe backflipper
- Location
- gold coast
i have a tbm cone and a magnum prop in my ski
it works killer my ski is not limited and so it can drive it well
i think if you were limited you would want to make sure you have a low prop in it
it works killer my ski is not limited and so it can drive it well
i think if you were limited you would want to make sure you have a low prop in it
The TBM pump cones put a hugh load on the motor. It will pull your rpms lower. So you much have the right pitch prop to keep your motor spining the rpms it should.
I know with my limited sxr I was pulling 7380 without cone and 6990 with.
When pullin your rpms lower you must jet right or you'll have some nice burnt pistons.
I know with my limited sxr I was pulling 7380 without cone and 6990 with.
When pullin your rpms lower you must jet right or you'll have some nice burnt pistons.
FL-cracker
X-H2O
- Location
- old exit 72 Melbourne
Wrong.... kevin at Leg Drag has the user name Leg Drag
Legdragger is someone different.
Legdrag.com kevin