Ok so been having some issues water got in the fuel. so i founf that the filler neck hose was split so this was a pain. i pulled the motor and tank. is there an easier way? and when i did that i coverd one end of the filler neck itself and blew into it and that seems to be cracked. is there an easier way to get to that hose clamp up front?
sxr filler neck
- Thread starter smich902
- Start date
tom21
havin fun
- Location
- clearwater FL
Not that I know of. is the hose cracked or the plastic neck? seems like lots of us have water in the tank. could this be a more common problem than anyone realizes. I would be interested to know where its cracked and if you can see it simply by removing the cap and inspecting.
I can see a little crack but barely. my hose was def split really bad. as far as the filler neck i coverd one side sprayed it with soapy water and bubbles came out where the threads are but toward the flange hard to explain. im not sure if its a common prob. maybe the cracked neck wasnt tthat big of a prob might have just been the hose. i might just order a neck just to be safe.
tom21
havin fun
- Location
- clearwater FL
man that is gonna be tough to diagnose without pulling the motor and tank everytime. thanks.
what year sxr?
what year sxr?
