SXR sxr carb setting for a.m. arrestors

[jetpilot808]

If I was to put K&N arrestors on my SXR, how do I adjust the carbs??? The ski is completely stock and I hate tuning carbs, so is there someone that has specific tuning instructions?

 

[Big Kahuna]

just turn the bottom and top screws about about 1/8 turn and ride and see. You will be bringing in more air, so you need to match with more fuel.
But Honestly, the OEM Airbox works pretty good. Remove the trumpets and try it. I have known racers who ran with the OEM Box and had fast ski's

 

[jetpilot808]

I already bought the arrestors and I'm hoping for something more specific as I have fear of tuning it wrong, because I blew a motor last year on a SX. But thanks Kahuna.

 

[Big Kahuna]

There is no specific answer. You are going to have to tune your carbs. There is not a builder or tuner that can tell you exactly how much to change your screws.

 

[Cannibal]

BK's right. Each filter is going to be different, then different if you put on outerwears, and different for your elevation, and different if you have stock pipe or aftermarket, etc.

Read through: THIS and THIS

Hit the lake and give it a go.