- Location
- Newport News, Virginia
ok so I have a 750 in my 550. Got rid of the dual Keihin 40mm carbs.. Got an r&d manifold for dual mikuni sbn 44 carbs.
The Mikuni carbs are linked together and the throttle linkage is on the wrong side. (opposite of the keihin's)
Can I disassemble the butterflies and pull the linkage out and swap which side (im assuming not as there is no stop plate on the other side.
there is no where to mount a bracket to hold a cable on the other side of the motor, and my cable is barley long enough. (750sx cable)
If I could attach a half moon to the end of the carb I need it at that would work. Utilizing all the stops on the other side.
I cant turn the carbs around (if the holes will even line up) because then the lever would be turning the wrong direction.
The Mikuni carbs are linked together and the throttle linkage is on the wrong side. (opposite of the keihin's)
Can I disassemble the butterflies and pull the linkage out and swap which side (im assuming not as there is no stop plate on the other side.
there is no where to mount a bracket to hold a cable on the other side of the motor, and my cable is barley long enough. (750sx cable)
If I could attach a half moon to the end of the carb I need it at that would work. Utilizing all the stops on the other side.
I cant turn the carbs around (if the holes will even line up) because then the lever would be turning the wrong direction.