Superjet bars odi grips stuck on

[Snowcon1]

So I put together my 0 degree bars and grips today but when I was tightening one of my grips the bit broke and is stuck in the screw I don’t have the start\stop switch or the throttle on yet so my question is will I be able to get both those on without taking the grips off?

Btw I have a 1991 Superjet

 

[mikidymac]

Yes on the start/stop switch but, no on the throttle.

 

[Snowcon1]

Ok that works is there anything I need to know when putting the stock throttle and start/stop switch on the bars

 

[harrymank]

Ok that works is there anything I need to know when putting the stock throttle and start/stop switch on the bars

I’d say don’t tighten the screws as much as you did the grips