Steering adjustment?!?

[Captain PegLeg]

I did some "modding" to my steering my moving the little ball further in on the steering nozzle. Now my bars are not straight when going, well, straight. Which results in more turn to the right, and not the left. How do i adjust my steering? I tried searching with no exact answer. Thanks everyone!

 

[Matt_E]

You loosen the stop nut on the barrel (end of steering cable, at the steering plate) and screw the barrel further on or off, depending on desired adjustment.

 

[curt248]

on the link (handlebar area or jet pump) pull the steering cable link (spring loaded) and pull up. It will then come off. After this is done, you can turn clockwise or counterclockwise to center the steering. I just did it myself. I also put the steering cable mount (near the handlebars) to the furthest out hole. Wow that made a big difference. The ski turns so nice and quick now. Make sure to center it so the steering hits the steering stops in both directions (otherwise you will stretch or ruin the steering cable). Good luck.