Starter>? Strange problem

[DAG]

ok strange problem... i just replaced my superjet handpole, so i cut the wires to the start/stop, and rode all day today no problems at all and when i go to put it in the garage i hit the start button to clear the water out.... and the motor dident turn over, however, the starter was goin crazy.. souded as if the moter was on, i hit the stop button dident turn off, pulled the key lanyard, yanked the spark plugs off, still not doing anything, yank the fule lines.. nothing.... finely after about a min i get the battery unpluged...

WTF would cause this? and how can i fix?


EDIT please respond HERE: http://www.x-h2o.com/threads/3911







-thanks

 

[sflsurfrider]

ok strange problem... i just replaced my superjet handpole, so i cut the wires to the start/stop, and rode all day today no problems at all and when i go to put it in the garage i hit the start button to clear the water out.... and the motor dident turn over, however, the starter was goin crazy.. souded as if the moter was on, i hit the stop button dident turn off, pulled the key lanyard, yanked the spark plugs off, still not doing anything, yank the fule lines.. nothing.... finely after about a min i get the battery unpluged...

WTF would cause this? and how can i fix?


thanks for the help..

-grif

are you saying that your starter motor was just spinning or your engine was revving out?

 

[jetskier79]

it's best if you don't post the same thread in multiple places.

 

[DAG]

sflsurfrider: the engine wasent turning over b/c there was no gas, but it shure as hell sounded like it was on, thats why i pulled the sparks and fule lines, but that dident do a thing, its 100% electerical

jetskier79 sorry, i posted here and then saw the tech thread...

 

[sflsurfrider]

the engine doesnt need gas to turn over. it needs gas to start. to turn over, it only needs a starter turning it.

 

[DAG]

then yes it was turning over... constently... sounded as if it was actualy on

 

[sflsurfrider]

did it sound as though the engine was revving very high and loud? if so, you could have an air leak, lean situation, or too high of an idle. it will continue to run w/o plug wires when it out of the water in that situation.

 

[DAG]

i'll post it in the other thread, just let this one die



Other thread here: http://www.x-h2o.com/threads/3911