Super Jet Start/Stop Switch Question...

[retroicon]

Alright, so a few days ago my SuperJet would turn over when I hit the start button... today I go out, hit the start button, and get absolutely nothing. The battery is fine, the connections are tight, the ground is good... I mean, I get nothing at all.

I disconnected the switch, and tried to jump the black/white connection going into the ebox, and got nothing again... did I try to jump the right connection?

I tried jumping the white/black because I think that's the start, and the brown/red is the stop... just jumping the white/black SHOULD have made the starter turn, right?

 

[Matt_E]

You need to jump brown/red. That's the start switch. Black/white is stop.

 

[retroicon]

well, that didn't work either... what should I jump in the ebox to see if the starter turns?

-G

 

[AtomicPunk]

the two posts on the relay (big red wires)...

 

[Don 79 TA]

check the ground wire, had that fokker rust apart on me (the one that went under the F-pipe to the starter)

 

[Waternut]

Just in case... You have to have the lanyard in place for the start button to work.