Super Jet Spark Plug Gap

[r12xmark]

I know this has probably been answered before. But i did a quick search and couldnt find an excact answer so figured id ask.

Im running my 2012 superjet with an ADA Head 35cc domes, Factory B pipe, Jetted stock carbs, Prok Filters

Im running Ngk BR8ES Spark Plugs, Im planning on putting the ski in water this weekend and start tuning the carbs excact. I was wondering what the spark plug Gap Should be on the plugs??? I basically bought the plugs took out of box and put in the ski, Never checked the gap so figure Before i start messing with anything i should gap them correctly

So what should the gap be on the plugs?

thanks

- Mark -

 

[stagesrt4]

I believe .032-.035


but dont quote me on that

i think those plugs tend to come .035 outta the box.. but sometimes a little smaller if there got bounced around hard in box.

 

[Blue]

.028 to .032

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[iangdesign]

I usually check the old plugs and gap or close the gap accordingly on the new plugs.

 

[Ducky]

I always go to .032 as it is the average of most recommendations.

You should always check the gap before installing. I have had some that had a super small gap and others that had a very big gap.

 

[r12xmark]

Sounds good... thanks

 

[mbrick]

The last few BR8ES's I received were either .032 or .038. so I brought a few of them in to .032 in.

Tip: Buy the solid top BR8ES and not the threaded removable top.
NGK #3961 = solid top BR8ES
NGK #5422 = removable top BR8ES