Super Jet Solas markings

[Mike W]

Been sorting out the SN I bought a few weeks ago and I'm trying to figure out what impeller it has without removing the pump. I was able to read the inside of the impeller but I'm a little confused about how they are marked. I know it's a Solas YB but the two other letters are hard to read and what I think they are done make since. It is stamped with YB and what looks like a 5 (which is likely a S) and what looks like an 8. Any help would be greatly appreciated.

 

[CRJ]

why dont you just pull the pump? its 4 10mm bolts and two 14mm bolts, leave the wear ring in there. i can take mine out in 6 minutes

 

[Mike W]

Didn't want to risk breaking any bolts right now. Want to ride this weekend.

 

[Mike W]

I was able to snap a pic. Of course it is backward due to being reflected off a mirror but it clearly says YB65 and I can't find one on the impros site. Maybe the 65 stands for 650?

 

[txsuperjetfreak96]

Google is your friend
http://www.x-h2o.com/archive/index.php/t-15808.html


NO WHITE FLAGS
DONT GIVE UP DONT SURRENDER

 

[kevbo]

It is an old straight 16.5 which is probably too much load.

 

[CRJ]

not to thread jack, but whats the stock pitch of a SJ aluminum prop?

 

[Mike W]

Google is your friend
http://www.x-h2o.com/archive/index.php/t-15808.html


NO WHITE FLAGS
DONT GIVE UP DONT SURRENDER

Yes it is. Thanks

It is an old straight 16.5 which is probably too much load.

It definitely isn't a low end prop. Looks like I will be looking for another prop.

not to thread jack, but whats the stock pitch of a SJ aluminum prop?

According to Impros it is a 14/19.