- Location
- Sonora, Ca
I'm having trouble finding a pole conversion bracket for my square nose, does anyone still make them?
Super Jet SN Pole conversion bracket
- Thread starter Insideline209
- Start date
- Location
- Sonora, Ca
Nobody knows? I know Hazard's are out there but dont know if they still make them
- Location
- Kansas City
Trimmed RN pole/SN bracket works great if you have hood straps..
SN pole prop rod also works if lengthened about 1/2"
I'm using a blowsion spring
Tis the method I used.
I can post pics of mine if you want...
SN pole prop rod also works if lengthened about 1/2"
I'm using a blowsion spring
Tis the method I used.
I can post pics of mine if you want...
- Location
- CT
Why wont the lowered RN bracket we sell work? I dont have a SN to test fit it on.
$75 shipped and if you cant make it work Ill take it back
$75 shipped and if you cant make it work Ill take it back
- Location
- CT
Anyone have a pic? I'm still not understanding the not fuly ext.
- Location
- Sonora, Ca
I am currently running a ground down SN bracket and RN pole that I bought from an X member. It works and still has the hood hooks but if I ever break the pole and buy an aftermarket pole I don't wanna have to grind it down too
Thanks for the input
Thanks for the input
Instead of the pole coming up to an almost 90* angle to clear the hood for removal, the pole only opens up to say 30*. It takes serious grinding and metal removal from both the bracket and the pole in order to open up enough. I suppose an aftermarket pole bracket will work if you modify the mounting surface on the hull.
- Location
- CT
No one wants to try to use our bracket? After looking at the brackets I still think our RN bracket will work on a SN with a RN pole. But I don't have a ski to try it on.
Byeai
"Cheetos-Man"
- Location
- Melbourne FL
rwilliamtaylor
Ride, Wrench, Repeat
- Location
- San diego
Here's a pic. I think the problem is getting the handle pole to sit low enough and also clear the very front/bottom of the pole and the hull when in the fully up position. I have a pole limiter on mine anyway so I don't seem to have any problems. I'm not sure which bracket I'm using either since I bought the ski with the handlepole already done this way.
- Location
- CT
Well I can always change that before we weld them. I just need to know how much it needs to be set one way or the other. But from looking at it I still think it will work the way it is.