SKi wont shut off?

[jeepinxj]

I cant get my ski to turn off, I took my switch apart and it looked ok. Then I looked at the connectors and they looked perfect. Whats the next step. It is a 90' SJ w/ a 650. To turn it off I had to pull the plug wires, It doesnt rev so I dont think its dieseling.

 

[Wolf Child]

got a shot gun?

 

[restosud]

looking to sell?
could use a ski that wants to keep running.:Banane57:

 

[jeepinxj]

Ski wont shut off

got a shot gun?

I do and was ready to pull the trigger!!!

looking to sell?
could use a ski that wants to keep running.:Banane57:

Haha!!! Ill let you know when I am.

But seriously any help would be great, am I going to need to take my ebox apart or is it something else? Air leak?

 

[Mouthfulloflake]

kill switch is black and white wire, connector is between E box and carb, on right side of hull standing in tray.

connectors get dirty, maybe its pinched.

pushing the red button, should put the white and black wires together, and killing the spark.

disconnect black white wires at connector, put meter into the end going towards teh pole, put on the Omega ( ohm) resistance setting, push red button. should go fron infinity to nearly zerop when pressed.

if it doesnt, youve got wire, connector, switch issues.

take a paper clip, insert into OTHER end of connector going towards E box, that shoudl kill the engine when its running.

 

[jeepinxj]

Got it, Ill check when I get home thanks alot.

 

[jeepinxj]

When I hoked the meter up it went from 0-over 100. Do I have something backwards? When I hit the red button it jumps, same with the lanyard button. Any other ideas?

 

[Mouthfulloflake]

touch the meter leads together, what does it show?

 

[munki63]

its got to be your switch, i wouldnt bother pulling your e-box, i had that problem once and im sitting here trying to remember how i fixed it,

 

[jeepinxj]

It jumps up like crazy.

 

[Mouthfulloflake]

analog meter?

or digital?

are you awake and near the ski?

It jumps up like crazy.

 

[jeepinxj]

The meter is digital.

 

[Mouthfulloflake]

crank the ski.

put a paper clip, or needle nose pliars down into the connector going TO the e box for the white/black wires.

Emulate the switch being closed at the bar, and see if that kills it.

if it DOES, then your issue is the bar switch or wires to there.

if it doest kill it, your problem is beyond that connector

 

[jeepinxj]

This sucks, hopefully its an easy fix. I'll try that when I get home.
Mouthfull thanks for all your help.

 

[Mouthfulloflake]

Not a problem man,

if you cant figure out Ill give you a call tonight if you want, IM terrible at trying to type and describe how to do stuff, Ive learned im hard to follow.

somethign about being terrible at grammer and punkuashun.

 

[jeepinxj]

That would be awesome, hopefully I get it but ill let you know. The instructions make sense its if I am capable. Thanks again.

 

[jeepinxj]

So I did the paperclip test and it killed it. So that means the CDI is fine. I plugged the black and white connector together and hit the stop button and it killed it. It fixed itself. Thanks for yourt help Mouthfull