Skat trak # 5 prop Need Help !!

[88X2RIDER]

Hey guys I have a skat trak #5 prop that came in my X2 back in 2010 .. I've asked around and checked on the skat trak web site and all there new Props are updated to the pitch and degree as in 9/15 I would like to know what is mine ,, it has a nice pull off the Rip but I want a free style prop for my x2 .. any help would be Great thanks Guys
also guys if u have a extra free style props hanging around I will make trades as well .
Jim,

 

[Midlake Crisis]

#5 = 15 degree
If it is in good shape I might buy it :0)

 

[88X2RIDER]

#5 = 15 degree
If it is in good shape I might buy it :0)

Ok thanks mike how is that for free style can u tell me a little about the prop ? would love to know

 

[Midlake Crisis]

Chris Newmiller told me that was the preferred size for a 650 with pipe, shaved head, lightened fw.

 

[88X2RIDER]

so I should use the prop that I have and not try to go any lower? Or should I try using a 9-15 prop ?

 

[Midlake Crisis]

I don't know how it would compare to others, but if I had it I would run it for recreational freestyle with my mods.

 

[88X2RIDER]

I don't know how it would compare to others, but if I had it I would run it for recreational freestyle with my mods.

Thanks bud .. I just search on the web and found out that the # 5 skat trak its Good for Rough water and surf riding . but then seen that its a decent free style prop ... I will deff try some other ones as well and see what works the best for my set up .. If I decide to sell it ill deff hit u up First .. again thank you for all the help Brother ..

 

[Captain PegLeg]

The kawi 650 pumps work really well with straight pitched props. A 15 pitch is perfect limited setup. You might be disappointed if you change it.

 

[eastcoastjumper]

i built a 650 last year for my brother and bought a 15* for it after researching a bit. Worked great both in the surf and on glassy water. fresh stock rebuilt motor with sbt crank and pro x pistons, full exhaust, westcoast intake and sbn44.

 

[88X2RIDER]

The kawi 650 pumps work really well with straight pitched props. A 15 pitch is perfect limited setup. You might be disappointed if you change it.

Thanks Captain WarerLogged I was just trying to get more bottom end punch out of a prop but Ill deff keep the Skat Track ... I'm going to run this motor one more season then it will be going into my new Hull i picked up a 1988 550 . Its mega lite lol when i went to go buy it i just picked it up and put it in the back of my truck i was like man she is so lite LOL . so it going to make a sweet free style back flipper ski for next year .. and hoping my 800 motor will be done soon for my x2 . but that motor setup wont see the water till next season

 

[Big Kahuna]

15 or 15.5 would be great. In stalled a 16 degree and it was a bit much with my stock X2. After Porting, Head, Dual Carbs, Pipe. It was perfect.

 

[Joe Dart]

In the past I ran a 36v Skat Trak prop on my 650sx. That is a 13/16 with pjs exhaust, intake manifold, bigger carb, scoop intake grate, westcost ride plate and stock everything else. I just changed to a 9/15 hooker, Blowson freestyle cone, Boyesen power reeds, water box mod, Blowson straight bars, D-cut ride plate, foot holds and new turf. I can't compare because I haven't finished the work yet but I'm anxious to get it back in the water. With the 13/16 it had no off the line power but great mid range power. After taking my ski to the beach once and ridding surf, I decided I needed to make some changes. It would also cavitate easily if you spun the ski out and tried to take off again.