- Location
- Bellingham WA
Hey there,
Ive just finished building and installing 62T/61x engine and am just double checking to see if I have the routing correct for fuel, this is my first time with a dual carb motor. It appears the slave carb isnt pulling fuel and when I had the carbs apart for rebuild I noticed that I couldnt blow through the slave cylinder return line barb. Is it just clogged or am I misunderstanding the system. I've attached a pic how I have it set up. ive got the pulse line on the fuel pump carb, the in line going to the straight barb on fuel pump carb, then the connect line on the bent barb going to the slave, then slave back to tank. Thanks.
![IMG_2278[380].jpg](https://www.x-h2o.com/data/attachments/295/295740-d3885e01978abd0edd79c074ecbfebec.jpg "IMG_2278[380].jpg")
Ive just finished building and installing 62T/61x engine and am just double checking to see if I have the routing correct for fuel, this is my first time with a dual carb motor. It appears the slave carb isnt pulling fuel and when I had the carbs apart for rebuild I noticed that I couldnt blow through the slave cylinder return line barb. Is it just clogged or am I misunderstanding the system. I've attached a pic how I have it set up. ive got the pulse line on the fuel pump carb, the in line going to the straight barb on fuel pump carb, then the connect line on the bent barb going to the slave, then slave back to tank. Thanks.
