sj reduction nozzle swap

caribeansurf

caribeansurf

Location
haiti
I DON T have access to a machine shop in my country and i need to have my 05 sj nozzle at 84 or 85mm. will the blaster 96 nozzle model fit my pump?, what's the exit diameter? or any aftermarket with siphon i could use.
also,if yes ,can i use the same steering nozzle.
i been searching the site a lot but i can find a 100% confirmation.
i really need someones advice.
 
SUPERJET-113

SUPERJET-113

GASKETS FOR CHAMP BRAP!
Location
Lake Havasu City, AZ USA
caribeansurf said:
I DON T have access to a machine shop in my country and i need to have my 05 sj nozzle at 84 or 85mm. will the blaster 96 nozzle model fit my pump?, what's the exit diameter? or any aftermarket with siphon i could use.
also,if yes ,can i use the same steering nozzle.
i been searching the site a lot but i can find a 100% confirmation.
i really need someones advice.
Click to expand...

Yes you can use a 96 Blaster reduction nozzle or your SJ one, and yes your steering nozzle will fit too. They are identical pumps(144mm). Most people go to 85mm otherwise it gets too thin.
Stock reduction nozzles are usually around 82.50mm.
 
caribeansurf

caribeansurf

Location
haiti
thanks for taking the time to reply sjett
the thing is, i can 't bore, so i need to find something stock close to 84 mm.
and i thought the blaster was bigger.
but maybe the raider is?
 
caribeansurf

caribeansurf

Location
haiti
thanks guys for the info, i'll see how i will do it since i don't leave in the us.
but if you know of a good aftermarket with siphon i can order, please let me know
thanks
 
Y

yamaslut

Guest
caribeansurf said:
thanks guys for the info, i'll see how i will do it since i don't leave in the us.
but if you know of a good aftermarket with siphon i can order, please let me know
thanks
Click to expand...

just ship yours over to Paul and he'll send it back...
He's only in Ga. Where are you in the Carib.???
 
You must log in or register to reply here.
Top Bottom