- Location
- new york
anyone have any pictures of a RRP pole set up? how are the cables run?
RRP pole
- Thread starter tonyguns85
- Start date
- Location
- Hokesbluff,al
cables run down the pole tubes
- Location
- new york
right or left what way has less tention on the cable
OCD Solutions
Original, Clean and Dependable Solutions
- Location
- Rentz, GA
Single or dual breather tubes? I have the RRP on my superjet and I have my throttle and steering down the right tube and my trim cable down the left. The SXR steering is on the left though isnt it? They don't have to go down the same tube, just whichever provides the straightest runs on the cables.
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
my rule is go down the opposite side from where it is mounted. Less bend and stress.
- Location
- new york
single right now im just useing the stock braket
How did it work out for you Im thinking about doing the same thing, Are you using a spring?
- Location
- new york
stock spring worked great all i had to do was sand the bushings slightly to get it in there
- Location
- new york
haha havent goten to use it yet but yea it looks alot lighter as i was putting it together i was wondering if i was goin to be able to keep it down and im useing the stock spring with no tenioner block
- Location
- long island ny
OptimaRacing
Jet zoomers
I run cables down both tubes. Throttle down throttle side tube, steering down steering side. Also make sure the casting on the bottom bracket isn't too sharp, where it will cut into your cables/electrics. If so, file them smooth and put a piece of hose around the cables/electrics to protect them from the sharp underside edge of the bracket.
The green poles look awesome! Powdercoat? I was wondering if powedercoating the tubes would make them too thick to fit into the brackets properly.
- Location
- long island ny
They're anodized. I think you're right about the powdercoating being too thick.
I'm happy with the green, but its not a perfect match with the green on the ski
I'm happy with the green, but its not a perfect match with the green on the ski
- Location
- new york
do you have any pics with the chin pad off? i wanna just get an idea of how everything looks
- Location
- long island ny
- Location
- new york
thanks love the anidized green looks sick
- Location
- long island ny
What kind of spring do you have? I had to heat mine up to get it the fit properly.
- Location
- long island ny
I got my pole and spring from blowsion. the spring they gave me was for a sj. they told me that was the one i needed and that I had to heat it up and bend it. thats what i did but it ended up bending too much so my spring is a little less than id like