Custom/Hybrid Rok vs Rev comparison

[jabber]

So theres been some talk on the boards that the rok is a rev hull with the nose cut off and a step down added to the front. Well I just happen to have both hulls in my garage and took some photos.

First is the length the rok is about 4-5" shorter overall. pics alittle misleading cause rev isnt standing straight up and pics at an angle.


Secondly the width of the rakes at the top of the intake grate. The rev is actually about a half inch wider between the rakes.


Thirdly the depth of the bottom hull, the rok is about an inch deeper than the rev.


fourthly the rails are wider on the rok and the rakes are deeper on the rok as well.


Finally the noses which we all know are totally different.


unfortunately I have no riding comparison as I have never ridden either one (i just like to collect and store hulls in my garage!)
Perhaps someone else can chime in with riding comparisons.

 

[Scraggly]

They don't ride anything a like to me

 

[Maverick]

The Rev is going to ride similar to a lightened Superjet for which it is very loosely based.
The Rok is going to ride similar to a lightened Sxr for which it is very loosely based.
When a ski hull is lightened considerably, certain characteristics become more pronounced.
One would be more Twitchy and Rocky the other would be more Flat and Carving.
You should know which is which or you are not a rider.:brap::brap:

 

[jabber]

But looking at the bottom of the hulls they seem very similar and seem like they would ride very similar. Can someone post pics of an sxr bottom