Ring end gap prox pistons

[Mike Grafas]

97 rn 701 bored 82mm
I can't find anywhere what the ring end gap should be, my piston clearance is about .0045
As of now my rings are .013 end gap
From searching I found that is optimal, if someone could shed some light if that is correct please

 

[Kaylee.S]

That's within the OEM range. I set mine to 0.016".

 

[Tyler Zane]

prox says .4-.5% of diameter. That puts your range at .012-.016.

Me personally, id bring it up to .016, as Kaylee also stated. Your cylinder wall to piston clearance is spot on.

 

[Mike Grafas]

Awesome thanks guys, rings are cut to .016 and pistons are on rods, time for the cylinders