- Location
- Costa Mesa CA
Are they going out of business or what? All there kits are out of stock for 550 stuff.
Robin will get back. I had an issue and he fixed it. I did a full engine and pump yamasaki conversion, the good news is putting Rhaas kits on isn't that difficult or time consuming, so if you end up getting it later on you'll have no problem getting it ready for next season.Unfortunately, I'm in a similar boat. Ordered parts, received the wrong parts. Unanswered emails, phone calls, and a full voicemailbox......
Robin will get back. I had an issue and he fixed it. I did a full engine and pump yamasaki conversion, the good news is putting Rhaas kits on isn't that difficult or time consuming, so if you end up getting it later on you'll have no problem getting it ready for next season.
My advice after making one if you want something to work on
1. Go over the hull completely, epoxy anything that looks suspicious
2. Reinforce areas that are problems, like the front of the hull
3. Check the through hull fitting for the steering cable
4. clean and prepare surfaces things will mount to
5. get the parts you'll need besides the kit (x2 drive shaft, 750 pump, etc)
I spent a lot more time prepping than actually putting mine together. And I know it's a little concerning he doesn't respond, but if you have a legitimate issue with a kit he will respond quickly. This time of the year is really bad for him. But he doesn't ghost.