Vumad
Super Hero, with a cape!
- Location
- St. Pete, FL
I bought a used b1 project and one of the drain plugs is missing. I have an assembly from a gp1200. It uses an 8mm lock nut, a screw and washers. How do i install this? Whats the trick?
Blaster Replace drain plug
- Thread starter Vumad
- Start date
- Location
- Granbury, TX
Pictures would help us help you.
- Location
- Midland, Ontario, Canada
Waveblaster drain plugs just get screwed in from the outside...not sure if the GP drain is same as a blaster but if the holes line up ditch the hardware u got from the GP and just use some screws
- Location
- Granbury, TX
Or get a versaplug and stick it in your drain plug hole...
http://www.shop.pwcdoctor.com/Versi...a-Polaris-Yamaha-04-on-NOT-GPR-BLACK-1401.htm
http://www.shop.pwcdoctor.com/Versi...a-Polaris-Yamaha-04-on-NOT-GPR-BLACK-1401.htm
Vumad
Super Hero, with a cape!
- Location
- St. Pete, FL
The drain isnt there. Its just 3 holes.
Vumad
Super Hero, with a cape!
- Location
- St. Pete, FL
So do they use wood screws? All of them screw in from the back, but they have to thread into something. The gp1200 uses 8mm nuts. The b1 appears to be drilled the same as the gp1200, not wood screws. I assume the only way is to try to go through the battery area and grt past the foam.
Vumad
Super Hero, with a cape!
- Location
- St. Pete, FL
Theres a hole in the back of the boat where the drain assembly used to be....
- Location
- Midland, Ontario, Canada
Yup, just ss screws will work...they just grip into the fiberglass/hull...I'm on my third blaster and all of them have been like this
- Location
- Midland, Ontario, Canada
The screws look similar to an Ebox screw...if you have the stock foam in there your not going to have access to get a nut on the back
Vumad
Super Hero, with a cape!
- Location
- St. Pete, FL
Vumad
Super Hero, with a cape!
- Location
- St. Pete, FL
This cost $1 for 2 screws, but ill keep it in mind if i continue having trouble riding my superjet and decide to spend more on the b1.