SX/SXi/SXi Pro refoam

[joele21]

does any one have pictures or a link to a thread of cutting out the tray and refoaming the tray on a 750? Im about to do it an would like to see how other people have done it.

 

[Bromstik]

There is a old thread on here:
750sx refoam and footholds
http://www.x-h2o.com/index.php?threads/750sx-refoam-and-footholds.127209/
I currently have 2 apart doing the same thing. Word of warning tho, out of all three 750 SXI pro's I have the plate that sits behind the drive shaft bearing was completely rotted away. It was the reason they foam was all wet. I didn't cut mine out as extreme, but a good starting point. Lots of extra glue to remove also.
Good luck.

 

[joele21]

awesome thanks!

 

[MajorPain]

I originally wanted to keep as much of the hull together as I could, but once you start defoaming you will quickly want more space. Wire wheels are you friend! Many of my seals were also rotted.