Blaster rear waterbox in blaster

[irishblaster]

can anyone advise me or post me a link on setting my blaster up to take rear waterbox.the prefered way is the wave raider waterbox under the battery tray but ive a lightweight waterbox(not sure what make)on the ski when i bought it and fits in fine.
ive already converted to rear exhaust exit left/kill switch side.
is it safe with waterflow etc?
Help would be great as im relatively new to the site and finding it hard to navigate....

 

[tshank123]

There's several ways to do it. I prefer the right rear exit. Try searching in this forum for it. Here is a link to PWCToday, it shows a couple different ways to do it.

http://www.pwctoday.com/showthread.php?t=257856&highlight=waterbox

 

[NINER]

Can anyone who did the right rear exhaust exit share exactly where to drill the hole in the transom?

 

[rustybarnard440]

What are people using for hosing for the waterbox on left side and right side rear exit?

 

[tshank123]

It depends on what chamber you're running. If you're running a limited, you can cut and flare your U-pipe so it just goes straight back instead of bending towards the stock waterbox. Then just use the stock long hose cut to length. For the rear exit on the right side, I used the stock chamber to waterbox hose. Put the big end on the waterbox exit and fit the smaller end onto a a 90 degree bent tubing. Use a small coupler to attach the the tubing to the rear exit.

If you're running a mod chamber, you have to get creative with tubing bends and such, but you can use the stock long hose to run it back to the waterbox.

Look at post #9 on that link I posted. I explain it all with pictures.

 

[dabeetereater]

i got a sj limited pipe with a 2 1/4 ubend and straight back into a "custom" gp800 alumnium wb, it works great but its stupid loud very very free flowing