pump Stock/mag ?

skinnyman

YOU CANT RENT MY SKI
Location
Dallas/ToyBox
This is what the boat came with
Race port S/S Lamey/Tim Judge built
Riva pipe
msd TL
46 novi
140 wear ring/142 9 vien pump 11/19 skat(very odd combo to me)

It works well with this boat for racing but im looking for bottom end w/out changing pipe etc.So Basically give a little top for bottom
Heres the deal wear was cracked have another coming ,so toaday I put another pump on the boat.
148 8 vien skat 9/17 84.5 nozzzle stubby pumpcone.
Burns the prop on bottom.
Not sure what pump to use and what prop/pump cone/nozzle:rolleyes:
I have a spare 8/17 48mm prop
84 mm nozzle
stock mag cone

Any suggestion greatly appreciated:hail:
 
F

Freestyleriverrat

Guest
I don't know I think if the motor is a lamey Race port motor then that is where you will see most of the power......mid to top. Impeller may help you hook up down low but could cause problems as the motor reaches its prefered powerband.
 
Top Bottom