i have a 93 waveblaster, all stock. last year it ran perfect, put some stabil in the gas and stored it all winter and now it wont start. i tried it a few weeks ago and the plugs kept getting full of gas. now today it acts like its not getting gas at all. spark was good and i put in new plugs just to be safe.
then i decided to try a compression test, and the gauge read about 40-50 psi on both cylinders. i pulled the head off and the back cylinder wall is almost in perfect shape, and the front one is a bit worn but it doesnt seem TOO bad. anyone got any advice for me here? i dont have alot of experience with small engines like this, so help me out please. also if i do have to rebuild, what is the best route to go? just get the cylinders cleaned up and new standard pistons or are there some reliable ways to get more power while im at it? thanks.
then i decided to try a compression test, and the gauge read about 40-50 psi on both cylinders. i pulled the head off and the back cylinder wall is almost in perfect shape, and the front one is a bit worn but it doesnt seem TOO bad. anyone got any advice for me here? i dont have alot of experience with small engines like this, so help me out please. also if i do have to rebuild, what is the best route to go? just get the cylinders cleaned up and new standard pistons or are there some reliable ways to get more power while im at it? thanks.