Pro-Tec trim system pics?

michael950

for me to POOP on!
Location
Houston, TX
Not sure if this is exactly what you wanted, but it is what I have.

When you install the trim cable, make sure you give yourself enough room to deal with any hoses or fittings in the pump area.

In other words, do not install the cable so it butts up against the cooling line or steering cable and leave you with no room to work.
 

Attachments

  • P3050008.jpg
    P3050008.jpg
    178.7 KB · Views: 64
Last edited:

SuperJETT

So long and thanks for all the fish
Location
none

Attachments

  • P3050008.jpg
    P3050008.jpg
    141.2 KB · Views: 45

michael950

for me to POOP on!
Location
Houston, TX
cool. thanks.

the trim cable tube should be on the starboard (right if facing from rear) side of the boat, right? i have a trim cable tube running through already, but its on the port side.

thanks. any pics of it with the brackets mounted up also?

The cable was installed when I got the ski, this was a photo from my old ski. He did a poor job, and am surprised there was not wet foam, he used silicone and it was pooly applied.

Pro-Tecs Instructions are at the bottom of this link.
 
Top Bottom