primer install help

[cmg]

I searched the threads and just kind of confused myself. So looking for clarification.
I have dual Full Spectrum Carbs with an external fuel pump. I only have one fuel line from the tank (what use to be the reserve) feeding the fuel pump with dual lines from the pump, one to each carb. There is no fuel selector switch. The return lines from each carb are tee'd to a single line back to the tank.

How should I install the primer (plunger type)?

 

[Shonuff]

From the return line to the single primer barb.

 

[DAG]

you can tap into your return line right at the carbs, between the tank and the T.

 

[cmg]

How about for getting the fuel into the carbs? With the Full Spectrums there is no choke to remove and replace with the barbs.

 

[SUPERTUNE]

Just use some aftermarket press in fittings, we have some or get some from other suppliers, lots carry them. I'll try and find a link as to what they look like...