pole bolt diameter/I need help finding a part.

[oxnard111]

I looked in the FAQ replacment part number section and didn't find it. Searched and couldn't find it... So what is the diameter of a pole bolt? I have one at home, but want to look up a part right now. Thanks

 

[SJ/XPBri]

The one from my squarenose was 14mm, don't know if it's different on a RN.
Bri

 

[oxnard111]

The one from my squarenose was 14mm, don't know if it's different on a RN.
Bri

square and round are the same, but just so happen to be using a square bolt. Thanks.

 

[oxnard111]

okay so maybe y'all could help me with this... I am trying to find some poly/plastic spaces to take up the slack between a round nose pole on a square nose bracket... I'm having trouble on McMaster Carr...

Inside diameter = 14mm
Out side = anything larger than 14mm
Length = 0.5"

I'm looking for something that will take up the slack like these washers are doing in this picture.

 

[accbr]

I just used washers on mine, but some metal shops sell solid aluminum in round bars. Cut it and drill the center.