Super Jet OEM air box alternatives.

[aaron750]

I am running a blowsion one piece head on my SJ and the stock air box no longer clears. My fix didn't hold, and I don't really want to order a riser and a new stocker. I have seen guys running dual single oem looking airboxes on their SJs and I was wondering if anyone can tell me if there are oem's from a couch or 650SN that will work on my stock 38's with the blowsion head ?

 

[chriselmore_1]

I ran stock 38s with a blowsion head. Just trim the airbox

 

[Crab]

No but you can install carb adapters and the conversion parts, I think Thrust sells them to run single oem style boxes. Or get a manifold spacer to move them out further.

 

[Mark44]

yep trim it.

 

[aaron750]

At the eleventh hour of my build I realized it needed to be trimed, and I trimed it too much I guess, and made a hole on the side. DOH !) I made a nice piece to cover it but when I rode the adhesive cracked of course, so thats why I was hoping for an alternative.

 

[Mobile Chernobyl]

If your going to run something else I'd buy it off you! I need an airbox for my build which uses twin 38's.

One of the issues I've seen with other twin carb airboxs that use the Mikuni style carb is that they often have a 4 bolt interface for the intake side of the carb.

 

[Scraggly]

at the eleventh hour of my build i realized it needed to be trimed, and i trimed it too much i guess, and made a hole on the side. Doh !) i made a nice piece to cover it but when i rode the adhesive cracked of course, so thats why i was hoping for an alternative.

use a plastic welder epoxy or actually plastic weld the part in place, it will hold

 

[aaron750]

If I don't use it, it will be because of the hole in the side. If you know of a good plastic adhesive that I don't let me in on the secret....

 

[Scraggly]

this stuff works great!!

 

[aaron750]

I bought a plastic welder and wasn't too happy with the experimental pieces. I'll have to give it another shot.

 

[Scraggly]

prep is the key with any adhesive, sand clean then apply

 

[aaron750]

I like the look of that stuff RAGS thanks I'll have to find some

 

[Scraggly]

oreillys or any parts store should carry it. it used to fix bumpers/grills etc.. most of the time.

 

[chriselmore_1]

A hole in the side of three airbox won't hurt anything.

 

[zyxwvu44]

I put a hole in the side of mine as well when I trimmed to fit my ADA head. Some tape for form and some JB weld fixed it up real quick!

 

[special fx]

I have one of the carbon fiber covers for the stock base that I'm looking to part with. No pics but it's this one: https://www.wamiltons.com/index.php?main_page=popup_image&pID=674

Looking for 100 bux shipped

 

[aaron750]

JB cracked on me : (