Need some more help

[Rheeder218]

Ok i need the torque spec for the bolt on the flywheel on a 760 motor, i also need torque specs for the motor bolts that bolt the motor to the mounts. I also need to know if you guys put anything on the gaskets for the carbs and exhuast. I think thats is it for now. thanks

 

[the only couch rider]

65ft lbs. on the flywheel bolts

no ft lb on the motor mounts, just crank them down


per paul @ lpw

 

[sjetrider]

NONE on carbs and 3 bond 1211 on exhaust gasket, intake gasket, base gasket, and flywheel cover gasket. I use the green ones for the carbs & do not want toreplace them every time I remove them for jetting so I use nothing on them.

 

[WAB]

I use some axle grease on all gaskets.

 

[SUPERTUNE]

Use CRC brand only Marine silicone spray on the carb, base, and exhaust cylinder gasket, a little threebond's 1211 on the header gasket.
75 ft-lbs for crankshaft bolt. 16 ft-lbs on 8mm bolts into the rubber mounts.